Table of Contents
Advertisement
h)
front bezel
i)
side cover
5. Flip the system to connect the SATA 0 cable to the connector on the system board.
6. Install the
right side cover
7. Follow the procedure in
RAID controller battery
Removing the RAID controller battery
1. Follow the procedure in
2. Remove the
side
cover.
3. To remove the RAID controller battery:
a) Disconnect the RAID controller battery cable from the RAID controller card.
b) Push the securing tab out to release the RAID controller battery.
After working inside your computer
Before working inside your
computer.
Removing and installing components
85
- Quick Links:
- Front View
- Nvme Flexbay
Hide quick links:
Advertisement
Table of Contents
