Table of Contents
Advertisement
CPX-900
NOTE:
See Appendix B for complete parameter descriptions.
Select Send Results displayed at the bottom of the tester screen to send the test results to the
optional built-in printer or via email. Select Done to return to the Main Menu.
System Test
Select System Test displayed at the bottom of the screen to continue to the System Test.
1.
2.
Start the vehicle's engine and let it idle.
Ensure all accessories (High Beam headlights/ventilation blower etc.) are off and select Next.
3.
The alternator output is tested.
4.
When prompted, rev and hold the engine to between 2000 to 3000 rpm.
The alternator output is tested.
When prompted Idle the engine and select Next.
5.
Turn on the high beam headlights and ventilation blower and select Next.
6.
The alternator output is tested.
7.
When prompted, rev and hold the engine to between 2000 to 3000 rpm.
The alternator output is tested.
When prompted, turn off all loads and Idle the engine. Select Next.
8.
System Test Results
The Test Results - Summary screen is displayed following a System Test. Select the Battery, Cranking,
or Charging Test to view detailed test results for each part of the test.
NOTE:
See Appendix B for complete parameter descriptions.
Select Send Results displayed at the bottom of the tester screen to send the test results via email.
Select Done to return to the Main Menu.
www.midtronics.com
Test Results - Battery Test
Test Results - Summary
Send Results
Test Results - Summary
3 – In Vehicle Test (Non-Rivian vehicles)
Email
Good Battery
Cranking Normal
Charging Normal
Done
Email
17
Advertisement
Table of Contents
