Operation - NOMA Landon User Manual

OPERATION

01
Restore power to the ceiling fan and test for proper operation. Remove the battery
cover by pressing firmly on the arrow and sliding the cover off. Install the 1.5 V battery
(included). To prevent damage to remote, remove the battery if not used for long
periods.
02
NOTE: The remote has been pre-paired in the factory for your
convenience. If you have two or more fans, please follow steps below
to control each fan independently. To add a remote to your fan's
memory, use the steps below:
1. Ensure AC power to the fan is OFF to begin the learning process.
2. Turn the fan's AC power ON. Within 60 seconds of turning AC power on, press and
release the "LEARN" button located in the remote's battery compartment to enter the
learning function. Once the fan has detected the remote control's frequency, the down
light of your fan, if applicable, will blink, and the fan blades will start to spin. The fan will
now accept commands from the added remote.
06
19