Electrical Safety - NOMA Landon User Manual

ELECTRICAL SAFETY

Instructions
Read all safety information and installation instructions before
•
you begin to install the fan and save instructions.
All set screws of the fan must be checked and re-tightened
01.
where necessary before installation.
To reduce the risk of personal injury, do not bend the blade
02.
brackets when installing the brackets, balancing the blades or
cleaning the fan. Do not insert foreign objects between rotating
fan blades.
Before changing the fan direction, turn off the fan and wait for
03.
the fan blades to stop completely.
The safeguards provided by these safety instructions and by the
04
separate installation instructions are not meant to cover all
possible conditions and situations that may occur. It must be
understood that common sense, caution and care are factors
which can not be built into this product. These factors must be
supplied by the person(s) installing, caring for and operating the
fan.
Making the Electrical Connections
WARNING: To avoid risk of electric shock, be sure to shut off
•
power at the main fuse or circuit breaker box before installing or
servicing this fixture. Turning off the electrical power by using the
light switch is not sufficient to prevent electric shock.
To reduce the risk of injury, install the fan so that the blades are
•
at least 6' 11" (2.1 m) above the floor and at least 30" (76 cm)
from the tip of the blades to the wall.
10