Operation - NOMA 052-9339-8 Instruction Manual

6. Install the light kit
6W
and install the glass shade onto the light kit
by turning the glass shade clockwise (see Fig. 10).

OPERATION

Remove the battery cover from the back of remote control
and insert 2AA (fig.a) or 9V batteries (fig.b) (included). Replace
the battery cover.
. Restore power to ceiling fan and test for proper operation.
. The fan remote control controls the fan settings:
HI : Turn on the fan at high speed.
MED : Turn on the fan at medium speed.
LOW : Turn on the fan at low speed.
LIGHT: ON/OFF : Press and release immediately to turn
DIMMER : Press and hold to dim or brighten
lights to the desired level and release
(Only for the tungsten bulb).
Forward and reverse direction function.
This ceiling fan is equipped with a reverse switch
for downward or upward air-flow.
Note: Do not touch the reverse switch when the fan blades are in motion.
Forward function
. On this setting, the fan will turn counter-clockwise
warmer weather to circulate hot air away from
your living space (see Fig. 11).
Reverse function
. On this setting, the fan will turn clockwise. Use this
function during cooler weather to re-circulate warm
air (see Fig. 12).
10
LIGHT
ON/OFF
HI
MED
Reverse switch
Forward Reverse
11
12
10
DIMMER
FAN OFF
LOW
switch housing
9