Supermicro H13DSG-O-CPU User Manual page 76

H13DSG-O-CPU User's Manual
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot. Select
Yes, On every reset to erase all system event logs upon each system reboot. Select No to
keep all system event logs after each system reboot. The options are No, Yes, On next reset,
and Yes, On every reset.
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system event log
is full. Select Erase Immediately to erase all events in the log when the system event log is
full. The options are Do Nothing and Erase Immediately.
Note: All values changed here do not take effect until computer is restarted.
BMC Network Configuration
Update BMC LAN Configuration
Select Yes to enable BMC Network Configuration. The options include No and Yes.
Configure IPv4 Support
This section displays static configuration features for IPV4 support.
BMC LAN Selection
This item displays the IPMI LAN setting. The default setting is Failover.
BMC Network Link Status
This item displays the IPMI Network Link status. The default setting is Dedicated LAN.
Configuration Address Source
This feature allows the user to select the source of the IP address for this computer. If Static
is selected, you will need to know the IP address of this computer and enter it to the system
manually in the field. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host
Configuration Protocol) server in the network that is attached to and request the next available
IP address for this computer. The default setting is DHCP.
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal and
in dotted quad form.
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of each three-
digit number separated by dots should not exceed 255.
76