Supermicro H13DSG-O-CPU User Manual page 60

H13DSG-O-CPU User's Manual
Memory Interleaving
This setting controls fabric level memory interleaving. Note that the channel, die and socket
have requirements on memory populations and it will be ignored if the memory doesn't
support the selected option. Options include Disabled and Auto.
Chipset Interleaving
This setting controls interleave memory blocks across the DRAM chip for node 0. The
options are Disabled and Auto.
BankSwapMode
This setting controls the Bank Swap Mode. The options are Auto, Disabled and Swap CPU.
Power Down Enable
Use this setting to enable or disable DDR power down mode. The options are Disabled,
Enabled and Auto.
DRAM Scrub Time
This setting provides a value that is the number of hours to scrub memory. The options are
Disabled, 1 hour, 4 hours, 6 hours, 8 hours, 12 hours, 16 hours, 24 hours and 48 hours.
TSME
Transparent SME. The options are Auto, Enabled and Disabled.
Enhanced PPR
Enable a full memory test. The testing will increase the boot time. The options are Disabled
and Enabled.
Memory Configuration
xGMI Link Width Control
The options are Manual and Auto.
xGMI max speed
Specifies the max frequency used for XGMI PState. The options are 12Gbps, 16Gbps,
17Gbps, 18Gbps, 20Gbps, 22Gbps, 23Gbps, 24Gbps, 25Gbps, 26Gbps, 27Gbps,
30Gbps, 32Gbps and Auto.
60