Supermicro H13DSG-O-CPU User Manual page 62

H13DSG-O-CPU User's Manual
ACPI SRAT L3 Cache As NUMA Domain
Use this setting to enabe/disable ACPI SRAT L3 Cache As NUMA Domain. The options are
Disabled, Enabled and Auto.
Super IO Configuration
Super IO Configuration
The following Super IO information will display:
•
Super IO Chip AST2600
Serial Port 1 Configuration
Serial Port 1 Configuration
Serial Port 1
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of a
serial port specified by the user. Select Auto to allow the BIOS to automatically assign the
base I/O and IRQ address. The options are Auto, (IO=3F8h; IRQ=4;), (IO=2F8h; IRQ=4;),
(IO=3E8h; IRQ=4;) and (IO=2E8h; IRQ=4;).
Serial Port 2 Configuration
Serial Port 2 Configuration
Serial Port 2
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of a
serial port specified by the user. Select Auto to allow the BIOS to automatically assign the
base I/O and IRQ address. The options are Auto, (IO=2F8h; IRQ=3;), (IO=3F8h; IRQ=3;),
(IO=3E8h; IRQ=3;) and (IO=2E8h; IRQ=3;).
Serial Port 2 Attribute
The options are SOL and COM.
62