Table of Contents
Advertisement
H13DSG-O-CPU User's Manual
IPv6 PXE Support
This setting allows you to Disable or Enable IPv6 PXE boot support. If disabled, IPv6 PXE
boot support will not be available.
IPv6 HTTP Support
This setting allows you to Disable or Enable IPv4 HTTP boot support. If disabled, IPv4 HTTP
boot support will not be available.
PXE Boot Wait Time
This setting allows you to set in a number field the wait time to press the ESC key to abort
the PXE boot. The default value is 0.
Media Detect Count
This setting allows you set in a number field the number of times presence of media will be
checked. The default value is 1.
MAC: 3CECEFFCB9AA-IPv4 Network Configuration
Configured
This setting indicates whether network address configured successfully or not. The options
include Disabled and Enabled.
Save Changes and Exit
Press <Enter> to save changes and exit.
MAC: 3CECEFFCB9AA-IPv6 Network Configuration
Enter Configuration Menu
The following information will display:
Interface Name / Interface Type / MAC address / Host address / Route Table / Gateway
addresses / DNS addresses
Interface ID
Use this feature to change/enter the 64 bit alternative interface ID for the device. The
string format is colon separated. The default setting is 3E:EC:EF:FF:FE:FC:B9:AA.
DAD Transmit Count
This feature displays the number of consecutive neighbor solicitation messages have
been sent while performing duplicate address detection on a tentative address. A value of
zero indicates that duplicate address detection is not performed. The default value is 1.
68
Advertisement
Table of Contents
