Table of Contents
Advertisement
7. Type the default user name and password.
NOTE: The default user name is Administrator and the default password is password. The user
name and password are case-sensitive.
8. Click OK. The Embedded Web Server interface opens with the View window
displayed.
Configure SNMP Trap Message Recipients
Perform this procedure to configure community names, write authorizations, and
network addresses and for up to 6 SNMP trap message recipients. A trap recipient is a
management workstation that receives notification (through SNMP) if a switch event
occurs.
To configure SNMP trap recipients:
1. Choose Configure at the left side of the window. The Configure window opens
with the Ports tab displayed.
2. At the Configure window, click the Management tab. The Management page
displays with SNMP tab selected, as shown in
edge switch 2/32 installation guide
All manuals and user guides at all-guides.com
Installing and Configuring the Edge Switch 2/32
Figure
2–46.
2-65
Advertisement
Table of Contents
