Table of Contents
Advertisement
ON-BOARD ETHERNET INTERFACE
The on-board Ethernet Interface can be used for WebApp access and Telnet communi-
cation.
The WebApp is accessible opening an Internet browser (Google Chrome is recom-
mended) and entering the device IP address 192.168.3.100 in the address bar.
Telnet communication can be established by connecting to device IP at port 23.
A CAB-ETH-X-M0x cable can be used to connect to a host device.
NOTE: Point-to-point connection is highly recommended.
Figure 15 - M12 8-pin Standard Ethernet Network Connector
STANDARD ETHERNET NETWORK CONNECTOR PINOUT
PIN
NAME
1
TX+
2
TX-
3
RX+
4
RX-
5
nc
6
nc
7
nc
8
nc
ON-BOARD ETHERNET INTERFACE
DESCRIPTION
Transmit data (positive pin)
Transmit data (negative pin)
Receive data (positive pin)
Receive data (negative pin)
Not connected
Not connected
Not connected
Not connected
PRODUCT REFERENCE GUIDE 30
Advertisement
Table of Contents
