Introduction; Shipment And Packaging - ESAB PSF 250 Instruction Manual

GB
3

INTRODUCTION

PSF 250, 305, 405 and 505 form a series of self--cooling swan neck welding torches.
PSF W form a series of water--cooled swan neck welding torches.
PSF RS3 welding torches are equipped with program selectors for switching
between preset programs. (Programs are preset at the welding power source.)
PSF C form a series of welding torches with smoke exhausters. The welding torches
are available with either self--cooling or water cooling systems and are of a
swan--neck design.
PSF LD is a smaller welding torch.
This welding torch is available in a variety of types; for more information see the
ordering number on page 22.
A range of accessories including welding tips, swan necks and contact tips are also
available.
Details of ESAB's welding torch accessories can be found on page 31.
4

SHIPMENT AND PACKAGING

The components are carefully checked and packaged, however, damage may occur
during shipping.
Checking procedure on receipt of goods
• Check that the shipment is correct by referring to the shipping note.
In case of damage
• Check the package and components for damage (visual inspection).
In case of complaints
If the package and/or components have been damaged during shipment:
Contact the last carrier immediately
S
Keep the packaging (for possible inspection by the carrier or supplier, or for
S
returning the goods).
Storage in an enclosed space
Ambient temperature
-- for shipment and storage: –25 °C to + 55 °C
Relative air humidity:
bg15d1e
up to 90 % at a temperature of 20 °C
- - 14 - -