Xylem FLYGT Concertor APP 411 Installation, Operation And Maintenance Manual page 10

2 System Description
No. Part
2 Controller
3 Gateway
4 HMI
5 HMI
6 Computer
7 Level sensors
8 Cloud connection –
9 Connection to
power
10 Extended I/O
module
8
Product name Description
APP 411 • The controller starts and stops the pump based on
input signals from, for example, level sensors and
high-level switches.
• The operator changes the pump settings through the
local HMI or through a SCADA system over Modbus.
• Data is logged by and stored in the controller.
• All the alarms are available on the local HMI and
Modbus.
• System communication through the backplane.
FPG 414 A gateway that is controlled by the APP 411.
• System communication through the backplane.
• All the alarms and data are sent to the controller.
FOP 402 HMI - Alternative 1
• A touchscreen HMI that is used for navigation and
selection in the menus.
• The touchscreen HMI is connected to a web server
that is embedded in the controller.
FOP 315 HMI - Alternative 2
• A basic HMI with a jog wheel that is used for
navigation and selection in the menus.
– HMI - Alternative 3
• The computer gives access to the same menu system
as the touchscreen HMI.
• The computer is connected to a web server that is
embedded in the controller.
– • Analog sensor
• Digital switch
Cloud services
– Contactors, fuses, relays
FPG 414 A gateway that is used as an extended I/O module
APP 411 Installation, Operation, and Maintenance manual