Related Manuals for Martec VAMPIRE Series
Summary of Contents for Martec VAMPIRE Series
- Page 1 VAMPIRE Series Ceiling Fan Instruction Book Models: MVA1043BBR MVA1043BCR MVA1043MBR MVA1043MMR MVA1043WSBR MVA1043WSCR MVA1043WSWR...
-
Page 2: Important Safeguards
ONLY install the remote controller kit that comes supplied by Martec Pty Ltd within package. DO NOT control operation of fan and light with any other remote control than what was approved by Martec Pty Ltd and supplied within this package, as this will void warranty. - Page 3 Parts List Description Quantity Motor Assembly Instruction Manual Screw Kit Balancing Kit Hanging Bracket Remote Control Kit Receiver of remote control Hanging bracket Canopy Down rod Cover Blade Housing Shade Page 3 02 8778 7500 | sales@martecltd.com.au | www.martecaustralia.com.au...
-
Page 4: How To Assemble
Place circular shockproof gasket above the hanger bracket. Align the bracket and screw the hanger bracket to the ceiling tightly. (See Fig.1). Martec Pty Ltd recommends the bracket to be attached with two long screws as supplied within the package. - Page 5 3. Tighten the derrick with screws (See Fig.5) Fig. 5 Tricolour CCT (Colour changeable temperature) Simply flick the switch on the LED plate (See Fig.6) to select the desired colour temperature (3000K, 4000K, 5000K). Please ensure light is OFF when changing the colour temperature. Fig.
- Page 6 IMPORTANT: It is crucial that polarity is correct. Power must be turned OFF before plugging in receiver as failure to may cause damage and will not be covered under warranty. Page 6 02 8778 7500 | sales@martecltd.com.au | www.martecaustralia.com.au...
-
Page 7: Important Reminders
INSTALLING RECEIVER REMOTE CONTROL IMPORTANT REMINDERS 1. Please note: Receiver must be correctly installed in the mounting bracket on fan. 2. When the transmitter cannot control the receiver, please check the battery has sufficient charge in the transmitter. 3. When the transmitter cannot control the receiver, please check if there is any existence of similar remote controlled products nearby, causing interference with each other. - Page 8 WIRING SCHEMATIC DIAGRAM FOR RECEIVER INSTRUCTIONS AND FUNCTIONS OF TRANSMITTER Page 8 02 8778 7500 | sales@martecltd.com.au | www.martecaustralia.com.au...
-
Page 9: Warranty Statement
MARTEC 3 YEAR IN HOME WARRANTY WARRANTY STATEMENT: Martec Pty Ltd warrants this product for a period of 3 years “In Home” warranty from the original date of purchase for residential situations: IMPORTANT NOTICE: MARTEC PTY LTD WARRANTS THIS PRODUCT FOR 3 YEARS WITH “IN HOME”... - Page 10 This warranty does not cover electrical humming noises, wobbling or any other external influences. Martec Pty Ltd reserves the right to change or amend any or all parts of this warranty statement at any time and without notice.
-
Page 11: Important Notice
Ceiling Fan Blades. Upon receipt of the abovementioned documentation, Martec Pty Ltd will issue a service call to fulfil the conditions of this warranty. It is the responsibility of the purchaser to keep the documents required for a warranty application for the duration of the “In Home”... - Page 12 I, the Customer, acknowledge that I will be liable for this charge should the authorised Martec Service Agent determine this to be the case. Failure to pay warranty recovery charges issued by Martec Pty Ltd will result in the termination of any remaining warranty, in addition to possible debt collection procedures.
Need help?
Do you have a question about the VAMPIRE Series and is the answer not in the manual?
Questions and answers