Programme Settings - Emos P5525 Manual

3.1 Press and hold down the CLOCK button and press the ON/AUTO/OFF to switch to daylight saving
time. The time on the screen will automatically shift forward one hour and the letter S will
appear on the screen.
3.2 Pressing the CLOCK and ON/AUTO/OFF buttons again cancels daylight saving time, the time shifts
back one hour and the letter S disappears.
Note: To set the day of the week and time, the LCD screen must be in real time display mode. If the
LCD screen is in programme setting mode, press the CLOCK to return to real time display mode.

Programme Settings

1. If the LCD is displaying real time (CLOCK is on the screen), press the TIMER button once to switch
to programme setting mode; 1ON will appear on the left side of the screen and the screen will
show the word PROGRAM.
1.1 "1" indicates the number of the programme group (programme group numbers range from 1 to 10).
1.2 "ON" indicates turning the socket on.
1.3 "OFF" indicates turning the socket off.
2. To select a programme group and choose between the on/off state, press the TIMER button to
increase the programme group number. The order is as follows:
1ON 1OFF 2ON 2OFF ...... 10ON 10OFF
Real time will be displayed automatically after 30 s of inactivity in settings or if you press the CLOCK
button.
3. After selecting a programme (1–10), you can set the day of the week and the time. Press
the WEEK button to select the day or block of days in the week. The days/blocks of days are
displayed in this order:
3.1 MO->TU->WE->TH->FR->SA->SU
3.2 MO TU WE TH FR SA SU
3.3 MO TU WE TH FR
3.4 SA SU
3.5 MO TU WE TH FR SA
3.6 MO WE FR
3.7 TU TH SA
3.8 MO TU WE
3.9 TH FR SA
3.10 MO WE FR SU
4. To set the programme time, the LCD screen must show the word PROGRAM.
4.1 To set the hour when the programme should turn on (1ON), press the HOUR button once to slowly
set the hour value. If you hold down the button, the value changes more rapidly. Release the
button once the time of choice in hours appears on the screen.
4.2 To set the minutes when the programme should turn on (1ON), press the MINUTE button once
to slowly set the minute value. If you hold down the button, the value changes more rapidly.
Release the button once the time of choice in minutes appears on the screen.
4.3 To set the end of the programme (1OFF), press the TIMER button and set the time as described
in points 4.1 and 4.2
Note:
(a) If you wish to change a previously set programme, proceed as described in points 4 to 4.3 in
section F and enter new values to overwrite the previous settings.
(b) Once a programme is set, press the CLOCK button to immediately return to real time display. If
you don't, real time will be displayed automatically after 30 seconds of inactivity.
Random Setting
1. The random setting feature turns the connected appliance on and off irregularly at a 10 to 31
minute interval from 18:00 to 6:00.
2. Plug the timer socket into a mains socket and set the programme using the ON/AUTO/OFF button
to AUTO so that you can start/end the random function.
3. Press the RANDOM button once; the letter R will light up on the right of the screen and the random
function is now active. The socket will be off for 10 to 31 minutes. After that, the function will
switch to the opposite mode, i.e. on.
3