Installation; Setting Time; Programmes Settings - Emos P5521N Instructions Manual

GB | Digital Timer Socket
Specifications
Voltage: 230 V~/50 Hz
Minimum time setting: 1 min
Deviation: ±1 min a month
Switched phase
Max. load: 16 A, 3 680 W
Operating temperature: -10 °C to +40 °C
Battery capacity: NiMH 1.2 V >100 hours
Features
• 8 customisable time programmes (ON/OFF).
• Choice between manual or automatic control (ON/AUTO/OFF).
• 12/24-hour cycle togglable using a switch.
• Switchable to daylight saving time.
• 16 combinations of days or blocks of days:
Mo (MO), Tu, We, Th, Fr
Tu (TU) Sa, Su
We (WE) Mo, Tu, We, Th, Fr, Sa
Th (TH) Mo, We, Fr
Fr (FR) Tu, Th, Sa
Sa (SA) Mo, Tu, We
Su (SU) Th, Fr, Sa
Mo, Tu, We, Th, Fr, Sa, Su Mo, We, Fr, Sa

Installation

1. Plug the timer socket into a 230 V AC socket.
2. Let it charge for approx. 12 hours.
3. Once it is charged, press the MASTER CLEAR button using a sharp object such as a pencil or pen.
The P5521N is ready for setting and use.

Setting Time

1. Press and hold the CLOCK button and repeatedly press the WEEK button to set the current day.
2. Set the hours and minutes in a similar manner, by pressing HOUR or MINUTE respectively. You
can speed up setting by holding the buttons.
3. Releasing both the CLOCK and HOUR or MINUTE buttons saves the set value. To delete incor-
rectly entered values, simply repeat steps 1 to 3. If the screen still does not light up, press the
MASTER CLEAR button.

Programmes Settings

1. Press the TIMER button and release it – you can now set the activation of the first time pro-
gramme (1_ON – activation).
2. Press the WEEK button to select the day or block of days in the week. Set the time for the 1_ON
programme using the HOUR and MINUTE buttons.
3. Press the TIMER button again – this ends the setting of the first time programme (1_ON) and you
can repeat the process to set the 1_OFF (deactivation) time programme.
4. The TIMER button allows you to set up to 8 time programmes.
E.g.: TIMER ON at 18:15 and TIMER OFF at 22:15 every day.
a) press TIMER and
b) press WEEK to set
c) press HOUR to set
d) press MINUTE to set
e) press TIMER
f) repeat steps b to d except you set 22:15 or 10:15 PM as the time
"1_ON" will appear on the screen
"MO,TU,WE,TH,FR,SA,SU"
18:00 or 6:00 PM
18:15 or 6:15 PM
"1_OFF"
2