Table of Contents
Advertisement
®
Anybus
Communicator
RTU/Serial
4.8. DIN Rail Demount
Before You Begin
IMPORTANT
Be careful when removing the Communicator from the DIN-rail. If not
removed properly, the DIN rail locking mechanism and the product cover
can break.
Have a flat-blade screwdriver, size 5.5 mm, available.
Procedure
Remove the Communicator from the DIN Rail:
1.
Insert the screwdriver into the Communicator DIN rail locking mechanism.
2.
To unlock the Communicator DIN rail locking mechanism, turn the screwdriver
clockwise.
Figure 11. Unlock the Communicator
Page 22 of 32
™
- PROFIBUS to Modbus
DIN Rail Demount
SP2980 Version 1.21
Advertisement
Table of Contents
Related Manuals for HMS Networks Anybus Communicator ABC3000
Related Products for HMS Networks Anybus Communicator ABC3000
- HMS Networks Anybus ABC3007-A
- HMS Networks Anybus Communicator ABC3028
- HMS Networks Anybus ABC3013-A
- HMS Networks Anybus North ABC3213-A
- HMS Networks Anybus Communicator ABC3261-A
- HMS Networks Anybus Communicator ABC3207-A
- HMS Networks Anybus Communicator ABC32 A Series
- HMS Networks Anybus Communicator ABC3200-A
Need help?
Do you have a question about the Anybus Communicator ABC3000 and is the answer not in the manual?
Questions and answers