Table of Contents
Advertisement
®
Anybus
Communicator
RTU/Serial
To Do Next
Connect the Communicator to power. See
Figure 6. Connect Communicator to power
Result
The set node address is active as soon as the Communicator is powered on.
NOTE
Changing the address settings on the rotary switches during operation is
ignored. For a new address to take effect, power cycle the Communicator.
Page 16 of 32
™
- PROFIBUS to Modbus
Connect to Power (page
Rotary Switch Settings
17).
SP2980 Version 1.21
Advertisement
Table of Contents
