Care And Maintenance; Parts List - Graco SWEET2SLEEP Instructions Manual

the bed), be sure that the fixing straps
are fastened and tightened correctly.
The product must be attached to the
parents' bed frame/support and there
shall never be a gap between the lower
side of the bedside sleeper and the
mattress of the adult bed.
If there are gaps between the lowest
part of the Bedside sleeper crib and
the parents' mattress, DO NOT use the
product.
Gaps should not be filled with pillows,
blankets or other items.
DANGER!-Always completely raise the
drop side when not attached to the
adult's bed.
WARNING ! –Placing additional items in
the product may cause suffocation.
WARNING! To avoid hazards from the
child's neck being caught on the top rail
on the side that is next to the adult bed,
the top rail must not be higher than the
adult bed mattress.
WARNING!- To avoid the risk of your
child being strangled the attachment
system to the adult's bed shall always be
kept away from and out of the crib.
A bedside sleeper shall ONLY be used
once it has been securely attached to
the adult's bed or when the drop side is
in the fully raised position to prevent the
child falling from height.
The product must always be placed on
a horizontal surface. Never leave the
product on a sloping surface with your
child inside.
Young children should not be allowed to
play unsupervised in the vicinity of the
crib.
Do not use the product without the
frame.
Keep the fixing straps out of reach of
children.
Do not use more than one mattress
in the crib. Only use the mattress that
comes with the product.
WARNING! Only use the mattress sold
with this crib, do not add a second
mattress on this one, suffocation
hazards.
When not attached to the bed, the crib
can be inclined by a maximum of 4
positions between one leg support and
the other.
Infants can suffocate on soft bedding.
Avoid placing pillows or similar items
under newborn babies for additional
comfort during sleep.
Use the crib in the "Bedside sleeper
Configuration" (fastened to the bed)
only with beds of the size indicated in
the reference figure at the beginning of
the manual.
Do not leave anything inside the
product that might reduce its depth.
To prevent the child from being
trapped, do not place the crib close to
walls or obstacles.
Do not leave any small objects inside
the product that might be swallowed.
Do not attach any accessories to the
product that have not been supplied by
the manufacturer.
Do not make adjustments to the
product when the child is in it.
When in the "Bedside sleeper
Configuration" (fastened to the bed), the
crib must never be inclined.
Do not move the product when the
child is inside.
Do not use the product with more than
one child at a time.
Do not place the product close to
another product, which could present a
danger of suffocation or strangulation,
7
e.g.strings, blind/curtain cords, etc. To
avoid strangulation hazards, never give
children objects with strings attached,
or leave these objects within their reach.
Prolonged exposure to direct sunlight
may cause the product's colour to
fade. After prolonged exposure of the
product to high temperatures, wait a
few minutes prior to putting your child
in it.
All assembly fittings should always
be tightened properly and that care
should be taken that no screws are
loose, because a child could trap parts
of the body or clothing (e.g., strings,
necklaces, ribbons for babies´ dummies,
etc), which would pose a risk of
strangulation.
Keep the product out of reach of
children when it is not in use.
Be careful when the child is in the crib,
that objects or bedding items do not fall
into the crib.
The mattress of the adult´s bed shall be
aligned to or above the height of the
drop side in the lowest position.
To prevent a suffocation hazard from
entrapment, the bedside sleeper shall
be properly secured to the adult bed
using the attachment system.
CARE & MAINTENANCE
See images -
39 40
From time to time check your crib for
worn parts, torn material or stitching.
Replace or repair the parts as needed.
Use only Graco® replacement parts.
The fabric cover of crib is not removable.
Your product can be spot cleaned with
a sponge and soapy water.
Do not use undiluted neutral detergent,
gasoline or other organic solvent to
wash the product. It may cause damage
to the product.
To wash carry bag, machine wash in
lukewarm water and drip-dry. Do not use
bleach.
At the beach or in the garden, clean
sand and grit off your product. Sand in
the long rail locks may cause damage.
From time to time, check your product
for worn parts, torn material or stitching.
Replace or repair the parts as needed.
If the product is not in use for a long
period of time, please put it in the shade
where your child cannot access it.

Parts list

A Height Adjuster Button
B Height Indicator
C Mattress
D Support Plastic Assembly
E Buckle A
F Feet rotation Release Button
G Wheel
H Adjuster Button Rail
I Support Tube
J Buckle B
K Buckle C
L Connecting Webbing
M Storage Bag
Bedside Sleeper Assembly
See images -
1 20
1. Please read all the instructions in this
manual before setting up and using
this product.
8