Do you have a question about the slim snacker and is the answer not in the manual?
Questions and answers
Amber L Trout
March 11, 2025
How do I remove seat cover?
1 comments:
Mr. Anderson
March 11, 2025
To remove the seat cover from a Graco Slim Snacker high chair, follow these steps:
1. Release the Folding Handle – Detach it from the black buckle by pulling it off the shorter side first. 2. Turn the Chair – This allows access to the necessary parts. 3. Release the Two Plastic Tabs – These hold the cover in place. 4. Detach the Elastic Bands – Located on the bottom sides. 5. Release the Front Side of the Seat Pad – It should now be loose. 6. Go to the Rear Side – Release the two cloth webbings. 7. Completely Remove the Cover – Once all attachments are undone, take the cover off.
This process ensures the cover is fully detached for cleaning or replacement.
Page 2
Failure to follow these warnings and the assembly instructions could result in serious injury or death. • PLEASE SAVE OWNER’S • FOLLOW ASSEMBLY MANUAL FOR FUTURE USE. INSTRUCTIONS CAREFULLY. If you experience any difficulties, • ADULT ASSEMBLY REQUIRED. please contact the Customer •...
Page 3
Parts list This model may not include some features shown below. Check that you have all the parts for this model BEFORE assembling your product. If any parts are missing, call Customer Service. No tools required. ALL MODELS...
Page 4
Attaching rear legs Insert “U” tube into the rear tubes until they snap into place. SNAP! Make sure the buttons snap into holes. SNAP!
Page 5
Front legs Insert “U” tube into the front leg tubes. SNAP! Make sure the buttons snap into holes. SNAP!
Page 7
To Secure Child WARNING Falling Hazard: Always use the seat belt. 5 Point Harness Use slide adjuster at shoulder and waist for tighter adjustment.
Page 8
3 Point Buckle To convert to 3-pt harness. Use slide adjuster at waist for further adjustment.
Page 9
When changing harness strap slots, MAKE SURE harness straps are going through same slots in seat pad and seat back. The harness straps must go into the slot that is even with or slightly above the shoulders. Avoid twisting straps.
Page 10
Attaching Tray Squeeze lever on both sides of tray and place on chair. SNAP!
Page 11
To Recline With baby out of high chair, squeeze recline lever and adjust seat back to 1 of 3 positions.
Page 12
To Fold for Storage Pull up on release strap in seat area and push legs closed.
Page 13
Basket Never store items in basket that are not safe for children and never allow children to play around storage basket.
Page 14
• FROM TIME TO TIME CHECK YOUR HIGHCHAIR for worn parts, torn vinyl or stitching. Replace or repair the parts as needed. Use only Graco replacement parts. • TO CLEAN HIGHCHAIR FRAME, use only household soap and warm water. NO BLEACH or detergent.
Need help?
Do you have a question about the slim snacker and is the answer not in the manual?
Questions and answers
How do I remove seat cover?
To remove the seat cover from a Graco Slim Snacker high chair, follow these steps:
1. Release the Folding Handle – Detach it from the black buckle by pulling it off the shorter side first.
2. Turn the Chair – This allows access to the necessary parts.
3. Release the Two Plastic Tabs – These hold the cover in place.
4. Detach the Elastic Bands – Located on the bottom sides.
5. Release the Front Side of the Seat Pad – It should now be loose.
6. Go to the Rear Side – Release the two cloth webbings.
7. Completely Remove the Cover – Once all attachments are undone, take the cover off.
This process ensures the cover is fully detached for cleaning or replacement.
This answer is automatically generated