Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Graco Swift Fold
Summary of Contents for Graco Swift Fold
- Page 1 PD326940F 11/15...
- Page 2 1 WARNING 2 Features Parts list 3 Assembly To Open Highchair Recline Seat Adjusting Height 4 Use To Secure Child Attaching Tray Tray Insert 4-D To Fold for Storage Head support and Harness covers 5 Cleaning Care and Maintenance...
- Page 3 Prevent serious injury or death: Failure to follow these warnings and the assembly instructions could result in serious injury or death. • STRANGULATION HAZARD: Do • PLEASE SAVE OWNER’S not place highchair in any MANUAL FOR FUTURE USE. location where there are cords, •...
- Page 4 2-A Parts list This model may not include some features shown below. Check that you have all the parts for this model BEFORE assembling your product. If any parts are missing, call Customer Service. No tools required. ALL MODELS FEATURES ON CERTAIN MODELS...
- Page 5 To Open Highchair 1. Push release button on the side of the frame and pull legs all the way toward you. DO NOT apply weight to the frame. SNAP!
- Page 6 2. Grab the handle behind the seat and lift seat upwards. SNAP! 3. Rotate handle down to raise the tray arm. Check to make sure it is locked in place by pressing down on both arm rests.
- Page 7 Recline Seat 3 recline positions...
- Page 8 Adjusting Height Pull up on seat to raise the seat. Squeeze seat buttons on both sides of the frame to lower seat. Lowest/storage position is for folding only, DO NOT put child in seat while using lowest/storage position. Seat height should not be adjusted with the child in the seat.
- Page 9 To Secure Child WARNING Falling Hazard: Always use the seat belt. 5 Point Harness 1. To open, press button on buckle to release the waist straps. 2. To close, slide shoulder strap connectors to waist straps and insert into buckle.
- Page 10 3. Use slide adjuster at shoulder and waist for tighter adjustment. 3 Point Harness 1. To convert to 3-pt harness.
- Page 11 2. Use slide adjuster at waist for further adjustment. Harness Height Adjustment 1. To access the seat back, undo the 2 rear snaps.
- Page 12 2. Locate the harness D rings under fabric and rotate D rings to push through seat back and seat pad slots. 3. When changing harness strap slots, MAKE SURE harness straps are going through same slots in seat pad and seat back. 4.
- Page 13 Attaching Tray 1. Pull locking clamps located underneath the tray outward and attach tray to seat. MAKE SURE the locking clamps fit into the grooves and does not move. 2. Squeeze adjustment button on front of tray to adjust tray to fit child.
- Page 14 Tray Insert Dishwasher safe. 1. To remove, lift tray up as shown.
- Page 15 To Fold for Storage 1. With your thumb, slide and hold the release switch and squeeze the One Hand Fold handle button to rotate the tray downwards.
- Page 16 2. Continuously lower seat to the bottom of the frame, while holding the handle, until hearing a click sound. 3. Pull handle rearward to close legs until the frame storage button clicks. SNAP!
- Page 17 WARNING To prevent injury from falling, DO NOT lean folded unit against wall. To prevent child injury when folding the seat, keep child away from the high chair during the fold process.
- Page 18 Head support and Harness covers (On certain models) Never use this head support or the harness covers on any other product. Slide harness covers onto shoulder straps.
- Page 19 Care and Maintenance Removing Seat Pad Certain models only, CHECK care tag on seat pad. 1. Remove harness covers, head support, and tray.
- Page 20 2. Undo the 2 rear snaps. 3. Locate the harness D rings under fabric and rotate D rings to push through seat back and seat pad slots. 4. Remove harness and waist straps from highchair.
- Page 21 5. Disconnect plastic hooks on back of footrest. 6. Recline seat back and pull sides of seat pad fabric out of the channels located in the armrests. 7. Remove seat pad from highchair.
- Page 22 8. To remove footrest pad, disconnect snaps at bottom and elastic loops at top. 9. To attach footrest pad, insert elastic loops through holes in front and attach as shown. 10. Connect snaps to back of footrest. Reverse steps to re-attach.
- Page 23 • FROM TIME TO TIME CHECK YOUR HIGHCHAIR for worn parts, torn fabric or stitching. Replace or repair the parts as needed. Use only Graco replacement parts. • TO CLEAN HIGHCHAIR FRAME, use only household soap and warm water. NO BLEACH or detergent.