Table of Contents
Advertisement
WARNING: If any parts are damaged or missing, do not work with the product until they are replaced. Not
respecting this warning may result in serious injuries. Call our customer line for support.
WARNING: Do not attempt to modify this product or to make accessories that are not recommended for use
with this product. Every such change or modifi cation constitutes incorrect use and may lead to a dangerous
condition, which may result in serious injuries.
WARNING: Do not connect the machine to a power source until it is fully assembled. Not adhering to this
instruction may lead to accidentally starting the machine and possible serious injuries.
7.
BEFORE TURNING ON THE ELECTRIC
TILLER
ATTENTION: Never remove or short-circuit the safety features mounted on the electric
tiller (for example fastening the push button/lever to the handle).
ATTENTION: The blades of the tiller will continue to rotate for a short time after it is
turned off! Never lift or carry the tiller with the motor running. When turning it on, make
sure that your feet are at a safe distance from the tiller blades.
ATTENTION: Always lead the tiller by the handles with both hands. Lead the tiller only
at walking speed.
Before turning on the tiller, make sure that the blades are not touching any object and that they can move freely.
Hold the handle fi rmly with both hands. Never work with the tiller with only one hand.
ATTENTION: The tiller may jump up and/or forwards if the blades hit very hard or frozen soil or if there are
hidden obstacles on the soil such as large stones, roots or tree stumps.
Power cord of the machine
Use only undamaged power cords.
The total length of the power cords must not exceed 40 metres because exceeding this distance will result in
reduced motor performance. The power cord must have a cross-section of 3 × 1.5 mm
The power cord plugs and sockets must be made from rubber and resistant against spraying water. Longer power
cords require larger wire cross-sections. The power cord and the connecting leads must be checked regularly for
damage. Before checking the leads, check that they are not under live current. Fully unwind the power cord. Also
check the entry locations of the cords, plugs and sockets.
ELECTRIC TILLER
Assembly / Before turning on the electric tiller
13
13
2
.
USER'S MANUAL
EN
EN
Advertisement
Table of Contents
