Winterizing Endless Pools Streamline - Endless Pools Winterizing Pool Series Service Instruction

Pool Series & Spa Series Winterization

Winterizing Endless Pools StreamLine

1. Turn off power to all pool equipment.
2. Drain approximately 18" of water from the pool.
3. When the water level is below the suction and return piping, all water MUST be removed from the plumbing
lines. Usually, loosening all union collars is sufficient to drain the system. A compressor or wet/dry vacuum may be
necessary to ensure all water is removed.
4. Remove the two drain plugs from the two speed pump housing to remove the water.
5. Add a non-chlorine winter chemical kit to pool water. Kits vary in many ways. The most important characteristic you
should look for is that the kit has a "non-chlorine" floater that will slowly disperse the contents over the course of
the winter. Generally speaking, Endless Pools tend to be much smaller than what the industry would consider a small
pool, so usually the kit labeled for the smallest gallonage will suffice. Additional chemicals such as algaecide stain and
scale control, and others may be included with this kit, none of which will damage the equipment but may not be
necessary. Winterization kits can be purchased through Endless Pools Customer Service.
6. If outdoors, place a fully inflated "exercise ball" in the pool to provide support for the cover while the water level is
lowered for the winter. These can be sourced at your local sporting goods store. Close the retractable security cover
over the exercise ball. Place a cover pump on top and plug into outlet (if outdoors). Be sure that the discharge hose
from the cover pump drains the water away from the pool area. It is a good idea to periodically check the function of
the pump and outlet over the course of the winter.
Endless Pools
Service Instruction
4
D90010_en 1122