ICON PRO-FORM 380 CS User Manual page 10

10. Start two M8 x 15mm Bolts (8) with two M8 Star
Washers (5) into the Uprights (53, 54). Then,
firmly tighten all six M8 x 15mm Bolts used
in steps 9 and 10.
With the help of a second person, carefully
lower the Uprights (53, 54) to the floor (see the
upper drawing in step 12).
11. Attach the ground wire on the Wire Harness (39)
to the indicated hole in the Base (52) with an M4
x 10mm Ground Screw (84).
10
5
8
11
52
Hole
Ground Wire
10
53
8 5
84
39
54