Disconnecting Bluetooth Connection (After Use) - Sony WF-1000XM5 Help Manual

Help Guide
Wireless Noise Canceling Stereo Headset
WF-1000XM5

Disconnecting Bluetooth connection (after use)

Disconnect the Bluetooth connection by operating the Bluetooth device.
1
When you are wearing the headset, you will hear a notification sound from both headset units (or from the headset
unit you are wearing) at the same time.
Set the headset units into the charging case, and close the charging case lid.
2
Put the left headset unit (the headset unit with the tactile dot) back into the left hole of the charging case, and put
the right headset unit back into the right hole of the charging case. Each headset unit will be set to the correct
position in the charging case by the built-in magnet.
The headset turns off.
Hint
When you finish playing music, the Bluetooth connection may terminate automatically depending on the Bluetooth device.
Related Topic
Turning off the headset
5-048-298-11(1) Copyright 2023 Sony Corporation
92