Functions For A Phone Call; Outgoing Call; Incoming Call - Sony WF-1000XM5 Help Manual

Help Guide
Wireless Noise Canceling Stereo Headset
WF-1000XM5

Functions for a phone call

The functions available during a call may vary depending on the profile supported by your smartphone or mobile phone.
In addition, even if the profile is the same, the available functions may vary depending on the smartphone or mobile
phone.
Depending on the connected device or the application you are using, the functions may not work properly even if you try
to operate them with the headset.
Refer to the operating instructions supplied with the smartphone or mobile phone.
Supported profile: HFP (Hands-free Profile)
During standby/music playback
You can use the right headset unit to perform the following operations.
Start up the voice dial function of the smartphone/mobile phone, or activate the Google app on the Android
smartphone or Siri on the iPhone: Hold your finger to the touch sensor for about 2 seconds or more.

Outgoing call

You can use either the left or right headset unit to perform the following operations.
When only one headset unit is worn in your ear, operate the headset unit that is worn.
Cancel an outgoing call: Tap the touch sensor twice quickly (with an interval of about 0.3 seconds between taps).

Incoming call

You can use either the left or right headset unit to perform the following operations.
When only one headset unit is worn in your ear, operate the headset unit that is worn.
Receive a call: Tap the touch sensor twice quickly (with an interval of about 0.3 seconds between taps).
Reject a call: Hold your finger to the touch sensor for about 2 seconds or more.
When [Head Gesture] is enabled on the "Sony | Headphones Connect" app, you can perform the following operations
while wearing the headset.
109