Retrofit mounting bracket for mpc3-101, mpc3-102, and mpc3-201 (2 pages)
Summary of Contents for Crestron MP-WP-2XLRO-1G
Page 1
MP-WP-2XLRO-1G and MP-WP-2RCAO-1G Media Presentation Wall Plate - XLR or RCA, Black, 1-Gang Product Manual Crestron Electronics, Inc.
Page 2
Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource. Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
In the Box Mounting Mounting into a 1-Gang Electrical Box Mounting onto a Rack Rail Mounting to a Flat Surface Connect the Device Resources Crestron Support and Training Programmer and Developer Resources Product Certificates Product Manual — Doc. 9390A Contents • iii...
Page 4
iv • Contents Product Manual — Doc. 9390A...
MP-WP-2XLRO-1G Features The MP-WP-2XLRO-1G provides a single-gang wall mount for (2) XLR outputs. The rear of the wall plate features a six-pin line-level audio input for two sources.
The Media Presentation Wall Plate can be mounted into a 1-gang electrical box, or onto a flat surface or rack rail. NOTE: The installation process for the MP-WP-2RCAO-1G and MP-WP-2XLRO-1G is identical. Only the MP-WP-2RCAO-1G is shown in the mounting illustrations.
2. Using a Phillips screwdriver and two 6-32 x 3/4 in. truss head screws, attach the wall plate to the electrical box. 3. Using a Phillips screwdriver and two 6-32 x 1/4 in. flat head screws (not included), attach a FP-G1 decorator style faceplate (sold separately) to the wall plate. 12 • MP-WP-2XLRO-1G and MP-WP-2RCAO-1G Product Manual — Doc. 9390A...
1. Position the wall plate horizontally so that the holes in the left or right mounting flange align with the holes in the rack rail. 2. Secure the wall plate to the rack rail using two mounting screws (not included). Product Manual — Doc. 9390A MP-WP-2XLRO-1G and MP-WP-2RCAO-1G • 13...
2. Connect the wall plate to the mounting bracket using a Phillips screwdriver and two SEMS screws 6-32 x 1/4 in. (not included). 3. Secure the mounting bracket to the flat surface using mounting screws (not included). 14 • MP-WP-2XLRO-1G and MP-WP-2RCAO-1G Product Manual — Doc. 9390A...
MP-WP-2RCAO-1G: The rear connections correspond to the front RCA connections as follows: Rear Panel Front Panel RCA center pin RCA shield MP-WP-2XLRO-1G: The rear connections correspond to the front XLR connections as follows: Rear Panel Front Panel XLR pin 2 XLR pin 3 XLR pin Product Manual —...
Page 16
MP-WP-2RCAO-1G Front Connections MP-WP-2XLRO-1G Front Connections 16 • MP-WP-2XLRO-1G and MP-WP-2RCAO-1G Product Manual — Doc. 9390A...
Resources The following resources are provided for the MP-WP-2XLRO-1G and MP-WP-2RCAO-1G. NOTE: You may need to provide your Crestron.com web account credentials when prompted to access some of the following resources. Crestron Support and Training Crestron True Blue Support Crestron Resource Library Crestron Online Help (OLH) Crestron Training Institute (CTI) Portal...
Page 18
This page is intentionally left blank. Product Manual — Doc. 9390A MP-WP-2XLRO-1G and MP-WP-2RCAO-1G • 18...
Page 19
Crestron Electronics, Inc. Product Manual — Doc. 9390A 15 Volvo Drive, Rockleigh, NJ 07647 06/12/23 Tel: 888.CRESTRON Specifications subject to Fax: 201.767.7656 change without notice. www.crestron.com...