Crestron MMK-12L Installation Manual

Mud mount kits

Advertisement

Quick Links

Crestron MMK-12L & WMKM-12L
Mud Mount Kits
Installation Guide

Advertisement

Table of Contents
loading

Summary of Contents for Crestron MMK-12L

  • Page 1 Crestron MMK-12L & WMKM-12L Mud Mount Kits Installation Guide...
  • Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2005 Crestron Electronics, Inc.
  • Page 3: Supplied Hardware

    The MMK-12L consists of three parts. These parts produce an assembly that attaches to the PMK-12L or BB-12L. The WMKM-12L consists of the same three parts that make up the MMK-12L as well as one mounting plate. The mounting plate is the part that provides the necessary support for post-construction applications.
  • Page 4 Supplied Hardware of the MMK-12L and WMKM-12L Dimensional Drawings NOTE: You can use the mounting plate as a cutout template. Drywall Cutout Dimensions 2 • Mud Mount Kits: MMK-12L & WMKM-12L Crestron MMK-12L & WMKM-12L DESCRIPTION Metal Plate, Mounting (WMKM-12L only)
  • Page 5: Installation

    The procedure in this section provides the necessary steps for the assembly of the MMK-12L to either the PMK-12L or BB-12L. It is assumed that the PMK-12L or BB-12L has been secured to the stud according to the procedures in the latest revisions of their respective Installation Guides (Doc.
  • Page 6 5. Insert the symmetrical mud ring plate into the opening, as shown in the illustration after this step. Insert and Secure Mud Ring Plate into PMK-12L (or BB-12L) 6. When the mud ring plate is in position, bend the top two flanges of the plate upward and the bottom two flanges downward. •...
  • Page 7 4. Locate an area on the wall that is free of miscellaneous wiring and studs. 5. Make a small hole near the middle of the designated site; verify that the location is suitable. Mud Mount Kits: MMK-12L & WMKM-12L • 5 Mud Mount Kits...
  • Page 8 NOTE: Fastener/mounting plate assembly will have slight play; this is normal. It allows for minor adjustments to the touchpanel during installation. 6 • Mud Mount Kits: MMK-12L & WMKM-12L Crestron MMK-12L & WMKM-12L 6. Use the drywall saw or equivalent to produce a level, rectangular cutout in the drywall as shown on page 2.
  • Page 9: Further Inquiries

    For assistance in your local time zone, refer to the Crestron website (www.crestron.com) for a listing of Crestron worldwide offices. You can also log onto the online help section of the Crestron website to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features.
  • Page 10: Return And Warranty Policies

    CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures.
  • Page 11 Crestron MMK-12L & WMKM-12L Mud Mount Kits This page intentionally left blank. Mud Mount Kits: MMK-12L & WMKM-12L • 9 Installation Guide – DOC. 6359...
  • Page 12 Crestron Electronics, Inc. Installation Guide – DOC. 6359 15 Volvo Drive Rockleigh, NJ 07647 (2013442) Tel: 888.CRESTRON 07.05 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.

This manual is also suitable for:

Wmkm-12l

Table of Contents