Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Crestron MMK-4000L
Summary of Contents for Crestron MMK-4000L
- Page 1 Crestron MMK-4000L & WMKM-4000L Mud Mount Kits Installation Guide...
- Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc.
-
Page 3: Supplied Hardware
The MMK-4000L consists of three parts. These parts produce an assembly that attaches to the PMK-4000L or BB-4000L. The WMKM-4000L consists of the same three parts that make up the MMK-4000L as well as one mounting plate. The mounting plate is the part that provides the necessary support for post-construction applications. - Page 4 Mud Mount Kits The dimensions of the MMK-4000L/WMKM-4000L are shown below. Dimensional Drawing MOUNTING PLATE FOR MUD RING PLATE FOR WMKM-4000L AND MMK-4000L Drywall Cutout Dimensions 2 • Mud Mount Kits: MMK-4000L & WMKM-4000L Crestron MMK-4000L & WMKM-4000L 8.99 in (22.84 cm)
-
Page 5: Installation
MMK-4000L Procedure The procedure in this section provides the necessary steps for the assembly of the MMK-4000L to either the PMK-4000L or BB-4000L. It is assumed that the PMK-4000L or BB-4000L has been secured to the stud according to the procedures in the latest revisions of their respective Installation Guides (Doc. - Page 6 PMK-4000L DRYWALL FLANGE 6. When the mud ring plate is in position, bend the top two flanges of the plate upward and the bottom two flanges downward. • If mounting into the PMK-4000L, bend the flanges approximately 90 degrees.
- Page 7 Crestron MMK-4000L & WMKM-4000L NOTE: Do not over tighten screws. Doing so may over-dimple or rip the mud ring plate. WMKM-4000L Procedure The procedure in this section provides the necessary steps for the assembly and installation of the WMKM-4000L into a wall. Complete the steps in the order provided.
- Page 8 NOTE: Make the cutout as level as possible. The mounting plate allows for only minor leveling adjustments. Insert the Mud Ring Plate into the Opening 6 • Mud Mount Kits: MMK-4000L & WMKM-4000L Crestron MMK-4000L & WMKM-4000L 2. Slide a push-on fastener over each pin on the fastener plate to loosely secure the fastener plate and the mounting plate.
- Page 9 15. When dry, the TPS-4000L can be installed using the four tapped holes in the mounting plate. Refer to the latest revision of the TPS-4000L Operations Guide (Doc. 6301) for details. Mud Mount Kits: MMK-4000L & WMKM-4000L • 7 Mud Mount Kits...
-
Page 10: Further Inquiries
Crestron's award winning customer service team by calling: You can also log onto the online help section of the Crestron website (www.crestron.com) to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features. -
Page 11: Return And Warranty Policies
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. - Page 12 Crestron Electronics, Inc. Installation Guide – DOC. 6303 15 Volvo Drive Rockleigh, NJ 07647 10.04 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.