Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Crestron MMK-3100L
Summary of Contents for Crestron MMK-3100L
- Page 1 Crestron MMK-3100L & WMKM-3100L Mud Mount Kits Installation Guide...
- Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc.
-
Page 3: Supplied Hardware
The MMK-3100L consists of three parts. These parts produce an assembly that attaches to the PMK-3100L or BB-3100L. The WMKM-3100L consists of the same three parts that make up the MMK-3100L as well as one mounting plate. The mounting plate is the part that provides the necessary support for post-construction applications. - Page 4 Mud Mount Kits The dimensions of the MMK-3100L/WMKM-3100L are shown below. Dimensional Drawing Drywall Cutout Dimensions 2 • Mud Mount Kits: MMK-3100L & WMKM-3100L Crestron MMK-3100L & WMKM-3100L 6.50 in (16.50 cm) 0.06 in 9.19 in (0.15 cm) (23.35 cm)
-
Page 5: Installation
MMK-3100L Procedure The procedure in this section provides the necessary steps for the assembly of the MMK-3100L to either the PMK-3100L or BB-3100L. It is assumed that the PMK-3100L or BB-3100L has been secured to the stud according to the procedures in the latest revisions of their respective Installation Guides (Doc. - Page 6 DRYWALL FLANGE " MUD RING PLATE 6. When the mud ring plate is in position, bend the top two flanges of the plate upward and the bottom two flanges downward. • If mounting into the PMK-3100L, bend the flanges approximately 90 degrees.
- Page 7 Crestron MMK-3100L & WMKM-3100L NOTE: Do not over tighten screws. Doing so may over-dimple or rip the mud ring plate. WMKM-3100L Procedure The procedure in this section provides the necessary steps for the assembly and installation of the WMKM-3100L into a wall. Complete the steps in the order provided.
- Page 8 Insert the Mud Ring Plate into the Opening (1) MUD RING 6 • Mud Mount Kits: MMK-3100L & WMKM-3100L Crestron MMK-3100L & WMKM-3100L 2. Slide a push-on fastener over each pin on the fastener plate to loosely secure the fastener plate and the mounting plate.
- Page 9 15. When dry, the TPS-3100L can be installed using the four tapped holes in the mounting plate. Refer to the latest revision of the TPS-3100L Operations Guide (Doc. 6291) for details. Mud Mount Kits: MMK-3100L & WMKM-3100L • 7 Mud Mount Kits...
-
Page 10: Further Inquiries
Crestron's award winning customer service team by calling: You can also log onto the online help section of the Crestron website (www.crestron.com) to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features. -
Page 11: Return And Warranty Policies
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. - Page 12 Crestron Electronics, Inc. Installation Guide – DOC. 6296 15 Volvo Drive Rockleigh, NJ 07647 09.04 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.
Need help?
Do you have a question about the MMK-3100L and is the answer not in the manual?
Questions and answers