Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Crestron MMK-1000L
Summary of Contents for Crestron MMK-1000L
- Page 1 Crestron MMK-1000L & WMKM-1000L Mud Mount Kits Installation Guide...
- Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2002 Crestron Electronics, Inc.
-
Page 3: Supplied Hardware
The MMK-1000L consists of three parts. These parts produce an assembly that attaches to the PMK-1000L or BB-1000L. The WMKM-1000L consists of the same three parts that make up the MMK-1000L as well as one mounting plate. The mounting plate is the part that provides the necessary support for post-construction applications. -
Page 4: Installation
MMK-1000L Procedure The procedure in this section provides the necessary steps for the assembly of the MMK-1000L to either the PMK-1000L or BB-1000L. It is assumed that the PMK-1000L or BB-1000L has been secured to the stud according to the procedures in the latest revisions of their respective Installation Guides (Doc. - Page 5 5. Insert the symmetrical mud ring plate into the opening, as shown in the illustration after this step. QTY.1 6. When the mud ring plate is in position, bend the top two flanges of the plate upward and the bottom two flanges downward. •...
- Page 6 Mud Mount Kits NOTE: Do not over tighten screws. Doing so may over-dimple or rip the mud ring plate. WMKM-1000L Procedure The procedure in this section provides the necessary steps for the assembly and installation of the WMKM-1000L into a wall. Complete the steps in the order provided.
- Page 7 6. Use the drywall saw or equivalent to produce a level, square cutout in the drywall that measures 4½ inches wide (114 mm) x 4½ inches high (114 mm). 7. Insert the symmetrical mud ring plate into the opening, as shown in the illustration after this step. MUD RING...
- Page 8 Bend Flanges NOTE: Do not over tighten screws. Doing so may over-dimple or rip the plate. 6 • Mud Mount Kits: MMK-1000L & WMKM-1000L Crestron MMK-1000L & WMKM-1000L drywall. Verify that the fastener plates are between the mounting plate and the drywall.
- Page 9 15. When dry, the 1000 Series touchpanel can be installed using the four tapped holes in the mounting plate. Refer to the latest revision of the Series 1000 Operations Guide (Doc. 5813) for details. Mud Mount Kits: MMK-1000L & WMKM-1000L • 7 Mud Mount Kits...
-
Page 10: Further Inquiries
If after reviewing this Installation Guide, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team by calling: As of the date of manufacture, the MMK-1000L and WMKM-1000L have been tested and found to comply with specifications for CE marking. Future Updates... -
Page 11: Return And Warranty Policies
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. - Page 12 Crestron Electronics, Inc. Installation Guide – DOC. 6062 15 Volvo Drive Rockleigh, NJ 07647 11.02 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.