How To Access Drive Settings In User Mode - iStorage datAshur PRO+C User Manual

iStorage datAshur® PRO + C
5. Enter your new User PIN
BLUE LED continues to blink.
7. Re-enter your new User PIN
GREEN LED continues to blink.
Note: The User PIN can also be changed by the Administrator using the Admin PIN if one exists, refer to section
14 'How to change the User PIN in Admin mode'. If a mistake was made while defining a new User PIN or the
procedure was not completed, the drive will retain the old User PIN.

5. How to access drive settings in User mode

The drive settings mode will allow the user to perform different functions such as creating an
Admin PIN, enabling and disabling the datAshur PRO
and determining the device version number.
The table below illustrates how to access the drive settings mode,
sections 6-11 describe how to perform the various functions.
1. Press KEY button once
RED, GREEN & BLUE LEDs will flash together once and then the RED LED
will continue to blink. (Note: Both RED and BLUE LEDs will blink together
if an Admin PIN also exists).
6. Press KEY button TWICE (double-click)
Blinking BLUE LED switches to a blinking GREEN LED.
8. Press KEY button TWICE (double-click)
Solid RED LED changing to GREEN solid LED indicating successful User
PIN change.
+ C as Read-Only, setting a Timeout lock
2. Enter your current User PIN
RED LED will continue to blink.
13
User Manual v1.0