Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Chauvet DJ 4Play 2
Summary of Contents for Chauvet DJ 4Play 2
- Page 1 User Manual...
-
Page 2: Table Of Contents
Automatic Programs....................Automatic Speed ..................... Sound-Active Mode ....................IRC-6 Infrared Remote Control ..............IRC-6 Operation ...................... Master/Slave Mode ..................Master/Slave Mode ....................5. Maintenance................Product Maintenance ..................6. Technical Specifications ............Returns.................... Contact Us ..................4PLAY 2 User Manual Rev. 1... -
Page 3: Before You Begin
Electronically published by Chauvet in the United States of America. CHAUVET, the Chauvet logo, and 4PLAY 2 are registered trademarks or trademarks of Chauvet & Sons LLC (d/ b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies. -
Page 4: Safety Notes
Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document. Page 2 of 15 4PLAY 2 User Manual Rev. 1... -
Page 5: Introduction
Introduction 2. Introduction Product Overview Back Panel View Power LED Display Power Fuse Menu Holder In/Out Buttons 4PLAY 2 User Manual Rev. 1 Page 3 of 15... -
Page 6: Product Dimensions
Introduction Product Dimensions Front View 33 in 838 mm Side View 12.5 in 318 mm 3.5 in 89 mm Page 4 of 15 4PLAY 2 User Manual Rev. 1... -
Page 7: Setup
3. Setup AC Power The 4PLAY 2 has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. -
Page 8: Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The 4PLAY 2 may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming. -
Page 9: Operation
Sets automatic programs Auto Speed S001–100 Sets the auto program speed DMX Linking The 4PLAY 2 works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer, which is available from the Chauvet website http://www.chauvetlighting.com/downloads/ DMX_Primer_rev05_WO.pdf. Configuration (DMX) Set the product in DMX mode to control with a DMX controller. -
Page 10: Dmx Channel Assignments And Values
215 220 White 1, red 3, green 1, and blue 3 221 255 All white, red, green, and blue 000 010 No function Strobe 011 255 Strobe, slow to fast Page 8 of 15 4PLAY 2 User Manual Rev. 1... -
Page 11: Configuration (Standalone)
DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller. Automatic Programs To run the 4PLAY 2 in Automatic mode, follow the instructions below: 1. Press <MENU> repeatedly until Auto shows on the display. 2. Press <ENTER>. -
Page 12: Irc-6 Infrared Remote Control
Operation IRC-6 Infrared Remote Control The 4PLAY 2 is compatible with the IRC-6 infrared remote control from Chauvet. IRC-6 Operation Automatic Mode Automatic mode will enable you to run the automatic programs on the product. To turn on Automatic mode (snap) with the IRC-6:... -
Page 13: Master/Slave Mode
Operation Master/Slave Mode The Master/Slave mode allows a single 4PLAY 2 product (the “master”) to control the actions of one or more 4PLAY 2 products (the “slaves”) without the need of a DMX controller. Once set and connected, the slave products will operate in unison with the master product. -
Page 14: Maintenance
6. Softly drag any dirt or grime to the outside of the transparent surface. 7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Page 12 of 15 4PLAY 2 User Manual Rev. 1... -
Page 15: Technical Specifications
Maximum External Temperature Cooling System 104 °F (40 °C) Convection I/O Connector Channel Range Optional Controllers 3-pin XLR IRC-6 Ordering Product Name Item Code UPC Number 4PLAY 2 07051554 781462219024 4PLAY 2 User Manual Rev. 1 Page 13 of 15... -
Page 16: Returns
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). Page 14 of 15 4PLAY 2 User Manual Rev. 1... -
Page 17: Contact Us
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact the dealer of record. Follow the instructions to request support or to return a product. Visit our website for contact details. 4PLAY 2 User Manual Rev. 1 Page 15 of 15...