Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for TOORX MIRAGE S70
Summary of Contents for TOORX MIRAGE S70
- Page 1 INSTRUCTION...
-
Page 2: Exploded Drawing
EXPLODED DRAWING - 5 -... -
Page 3: Parts List
PARTS LIST PART NO PART NAME Q'TY Front roller Running belt Rear roller Running deck Side rail Fix cushion of running deck Rubber cushion of running deck Motor belt Motor Motor cover Motor frame Left end cap Right end cap Rear left level frame cover Rear right level frame cover Rear support cover... - Page 4 Left outside protect cover Right upright Left upright Console frame Handlebar down support Foam Right heart rate handle fix tube Left heart rate handle fix tube Heart rate handle Aluminum top cap Right cap frame Right up cover of handle Right up cover of main body Right down cover of main body Fix tube of heart rate handle...
- Page 5 Display overlay Press key overlay Control board of console 2 inches of the horn 1.5 inches of the horn Wind scooper USB board Control wire1 Control wire2 Control wire 3 Control wire 4 Magnet ring Side rail cushion Handle protect cover Filter M8*50 Allen head bolt Φ8 Washer...
-
Page 6: Hardware Comparison Chart
M8*30 Allen head bolt M8*40 Allen head bolt M10*40 Allen head bolt M8*25 Allen head bolt M8*25 Allen head bolt Φ8 Arc Washer ST4.2*15 Screw M10*30 Allen head bolt Φ10 Washer M8*35 Allen head bolt M8*15 Allen head bolt ST2.9*8 Screw M4*16 bolts M4 Lock Nut M8*60 Allen head bolt... - Page 7 ASSEMBLY INSTRUCTIONS： WARNING: Please put on all the screws, washers and bolts then tighten them. STEP1: Fix upright onto the base frame with M8*25 Allen head bolt115,M8*25 Allen head bolt116 and Φ8 Arc Washer117. - 10 -...
- Page 8 STEP2: Fix the console onto the upright with M8*25 Allen head bolt116 and Φ8Washer92. Connect all cable . A. Main connection cable B. Incline handlebar button cable C. Speed handlebar button cable D. Pulse cable E. Pulse cable F. Safety key cable G.
- Page 9 STEP3: Fix the protect cover of upright onto the base frame with ST4.2*15 Screw118. STEP4: Fix the handle protective cover on the upright with ST4.2 * 15 Screw 50. STEP5: Fix console on the console frame with Φ8 Washer92 and 127. - 12 -...
- Page 10 Folding illustration: To unfold the treadmill: Folding illustration: To drop down treadmill: 1. Strike the damper. 2. Hold on to the top end covers and pull down the treadmill slowly on the ground. To fold up the treadmill: Both hands hold on the bottom end covers and lift up the treadmill.
-
Page 11: Computer Operation
COMPUTER OPERATION The Operation OPERATION INSTRUCTION Features a) Manual program Run directly after pressing start b) Target program Press the target button to set the countdown to set the target time, distance, calories, and number of steps. c) Fixed program (P01~P24) Press PROGRAM to select the program, use the up/down arrows to scroll through the list 24 programs can be used to select and set the running time (default 99 minutes), from 5 minutes to 99 minutes. - Page 12 b) start running After standby or program setting, press <;Start>;, count down with 3-2-1 (3s), and then start running. c) Stop running During operation, press <;stop/pause>;, the motor and lifting motor stop The first time the user presses stop/pause the treadmill, we pause and hold it for 2 minutes, then it will automatically stop and rise to 0.0 If you press stop/pause twice, the treadmill will stop, lift 0.0 and reset the data When the safety switch is removed, the speed returns to zero.
- Page 13 2) Press MODE to set the age, the default value is 40, the range is 16-65-and then press Enter 3) Press MODE>; set the weight, the default value is 68 kg, the range is 40-130 kg-then press Enter 4) The suggested target will be displayed in the heart rate window, and the user can use the up/down arrows to change the value-then press Enter Press <START>, the treadmill starts to run, the default speed is 1 km/h, and the time window displays the default value 30 or the set time.
- Page 14 Press ENTER to set the time. Press ENTER again to confirm or START to directly start USER program operation. The following is the setting method of 30-segment data of USER program 1) Press the MODE button to enter the data setting step. The data in the first column flashes to enter the editing state, press the speed +/- or use the speed shuttle switch to set the speed value.
- Page 15 TIME 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 MODE P-01 SPD P-02 SPD P-03 SPD P-04 SPD P-05 SPD 10 8 10 8 10 8 P-06 SPD 10 12 10 8 10 12 10 8 10 12 10 8...
- Page 16 GARLANDO SPA Via Regione Piemonte, 32 - Zona Industriale D1 15068 - Pozzolo Formigaro (AL) - Italy www.toorx.it - info@toorx.it...
Need help?
Do you have a question about the MIRAGE S70 and is the answer not in the manual?
Questions and answers