FLIR DNR500 Series Quick Connection Manual

Package contents:

NVR
USB Mouse
Remote Control Power Cable
Rack Mount Bracket x 2 Rack Mount Screw x 6
Quick Start Guides
Ethernet Cable
Need Help?
Visit us online for up-to-date software and complete
instruction manuals
1
flir.com/security/support
Search the model number of your product
2
3
Click on your product in the search results
4
Click on the Downloads tab
Information in this document is subject to change without notice. As
our products are subject to continuous improvement, FLIR Systems,
Inc. and our subsidiaries reserve the right to modify product design,
specifications and prices, without notice and without incurring any
obligation.
E&OE © 2016 FLIR Systems, Inc. All rights reserved.
Quick Connection Guide

Connecting your system

1
IP Cameras*
Ethernet Extension Cable*
NOTE: It may take up to
1 minute for cameras
to start up and transmit
video to your NVR.
Recommended: Connect
cameras to NVR
OR
Connect cameras to a PoE
Switch* or Router* on your
network. See "Adding cameras
from the LAN" on reverse for
more details.
6: ON
8 channel configuration shown. 4/16 channel will have the respective number of video inputs. For camera compatibility
information, visit www.flir.com/security/support
*Not included/sold separately.
HD Network Video Surveillance Recorder
2
3
Monitor/TV*
Router*
!
For best performance it
is recommended to use
a 1080P monitor/TV and
set the NVR's output
resolution to 1920x1080.
See the instruction
manual for details.
DNR500 Series
4 5
Power
Mouse
HDMI*

Beeping

OR
VGA* If the system is beeping after startup, the Ethernet
cable may not be connected or the system may
not be connected to the Internet.
To stop the beeping:
1. Connect an Ethernet cable from the system to
your router and restart the system. OR
2. Right click and click Disable Beep.

Firmware Update

This system features automatic firmware upgrades
for enhanced functionality. It is required
to upgrade your system to the latest
firmware version.
If a firmware upgrade is available:
1. After startup, a notification will appear
asking you to upgrade the firmware. Click OK to
upgrade.
2. The system will download and install the
firmware upgrade. Wait for the firmware update
to complete. The system may restart during the
firmware upgrade process.
DO NOT power off or disconnect the power cable
during firmware installation.
DNR500_Series_QCG_EN_R3