Table of Contents
Advertisement
User Manual
V620D0001 Rev 0.0
17-Nov-2021
8.
Maintenance
Other than basic cleaning, the V-62x series stage is maintenance-free.
8.1.
Cleaning the Stage
To clean the stage surfaces, use isopropanol and a clean, lint-free cloth or wipe. Apply the cleaning agent to the
cloth and wipe down all of the surfaces.
Do not use cleaning agents other than isopropanol. Agents such as acetone or other detergents
can damage certain parts of the stage.
8.2.
Preparing the Stage for Transport
If the stage requires movement, transport, or shipping, follow these steps:
1. Turn off the controller power.
2. Disconnect stage cables.
3. Remove the payload.
4. Install the shipping restraint and restraint label. Tighten the stage shipping restraint screws using an Allen
wrench.
The stage is now secured and can be safely moved. If the stage needs to be shipped, use the original packing
materials.
Use care when moving the stage. Avoid any shocks, drops or bumps that can cause scratches,
dings, dents, or distortion of the stage.
Do not attempt to move or transport the stage with the payload attached. This may damage the
stage and the payload.
PI (Physik Instrumente) L.P.
16 Albert Street, Auburn, MA 01501
Tel: 508-832-3456 Fax: 508-832-0506
Email: air@pi-usa.us
Page 20 of 27
Advertisement
Table of Contents
