CHAPTER 2: INSTALLATION
After the display changes to Joined:
From the top left menu, select Sensors.
1.
For physical sensors, entries will appear automatically.
NOTE: Most LoRaWAN
sensors carry more than one value which are referred to as datapoints. For example, a
®
temperature and humidity sensor with a good battery will display three datapoints. While the type is provided
by the sensor's vendor and entered during the join process, you may change the name by clicking on "edit." The
"Settings" section of this manual provides more information about this process.
FIGURE 2-7: SENSOR STATUS SCREEN
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
9