Black Box AlertWerks AW3000 User Manual page 24

CHAPTER 5: CREATING AN ACTION
Once you configure an action, it is displayed on the Sensors menu sensors right below the corresponding datapoint.
That line has a blue background which changes to red as the configured timescale is reached.
Apart from >, <, or =, there are many more possibilities. First, you can define two values and combine these with AND
or OR. Using the previous example, you could indicate if temperature <10 and if temperature >0., then this action is
active between 0 and 10 degrees. Alternatively you could indicate if temperature is <10 or >20, then this action is active
if temperature is below 10 or above 20 degrees. Remember that AW3000 allows combinations that do not make sense,
such as if temperature is <10 and >10. This action will never be active.
Delta Up and Delta Down are useful functions. Delta is shown in the web interface with the greek symbol accordingly.
This allows you to set actions active if values change up or down with a certain range, such as if temperature is delta
down 0.1 and <10. This action will be active if the value is below 10 degrees and still decreasing. These functions are
useful for occupancy or people-count sensors.
NOTE: Delta Up and Down only works if storing values is not disabled.
24
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269