Table of Contents
Advertisement
CHAPTER 2: INSTALLATION
NOTE: Carefully consider device placement, since it needs to be able to receive and transmit wireless information.
For example, locating the device inside of a steel cabinet would interfere with the wireless signal, so placing an
antenna on top of the cabinet would be necessary in that case.
2.1 INSTALLATION PROCEDURE
To install the AW3000:
1. Connect a HDMI or DVI (with Adapter) monitor to the unit's HDMI output.
2. Power on your monitor.
3. Connect a keyboard and mouse or a touch monitor to the unit's USB port(s).
4. Connect a sub 1GHz 50 Ohm Antenna to the unit.
5. Power up the unit by inserting your RJ-45 cable coming from a PoE PSE device (PoE Switch or PoE Injector following
802.3at) or by inserting the Mini USB cable coming from a power supply with at least 5V, 3A.
NOTE: A Black Box video and Linux startup messages will be displayed during the boot process. After loading the unit's
graphical interface, the unit will start a web browser and display the AW3000's start screen.
AW3000 can be used with WiFi 802.11 b/g/n/ac at 2, 4, or 5 GHz, RJ-45 connectivity, or without Internet or network
connectivity.
2.1.1 SETTING UP CONNECTIVITY
To set up connectivity:
Close the browser window and move the mouse to the upper portion of the screen. This displays the hidden menu
1.
bar on the start screen.
4
FIGURE 2-1: START SCREEN
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
Advertisement
Table of Contents
