Emissions Test Mode; Ending Emissions Test Mode - Viessmann VITOCROSSAL 300 CU3A 35 Operating Instructions Manual
Floor mounted, gas-fired condensing boiler with matrix gas burner and lambda pro control, for operation with natural gas and liquid propane gas, heating input 19 to 199 mbh, 5.6 to 58 kw, with vitotronic 200 kw6b controls
Hide thumbs
Also See for VITOCROSSAL 300 CU3A 35:
- Technical data manual (33 pages) ,
- Service instructions manual (116 pages) ,
- Installation instructions manual (60 pages)
Table of Contents
Advertisement
Vitocrossal 300 CU3A 26 to 199 Operating
Emissions Test Mode
Emissions test mode should only be activated by a
certified technician during the annual inspection.
Extended menu:
1.
2. "Test mode"
3. "Flue gas test °C ON"
The following functions are activated:
H The burner is switched on (the display shows symbol
).
A
Note: Burner start-up can be delayed, e.g. through fuel
oil preheating.
- The pumps are started and the mixing valves
remain in control function.
- The temperature controller regulates the boiler
water temperature.
Note: You can also enable emissions test mode if the
controls are locked out by your heating contractor.
Ending emissions test mode
H Automatically after 30 min.
OK
H Press
.
Emissions
35
Advertisement
Table of Contents
