Emissions Test Mode; High Limit Safety Cut-Out Test - Viessmann VITODENS 100-W B1HE Operating Instructions Manual

Vitodens 100-W B1HE/B1KE Operating

Emissions Test Mode

High Limit Safety Cut-Out Test

Emissions test mode must only be activated by licensed
professional heating contractor during the annual
inspection.
If possible, have the emissions test carried out during
the heating season.
Emissions test mode is switched on via the service menu.
Tap the following buttons to access the service menu:
1. Call up the home screen.
2.
3. for "Settings"
4. OK to confirm
5. for "Service"
6. OK to confirm
7. for "Test mode"
8. Selet "Yes"
9. OK to confirm
10. for "Test mode"
11. OK to confirm
12. Select "Start"
13. OK to confirm
Note: The settings and functions in the service section
can be found in the installation and service
instructions.
Vitodens 100-W installation and service
instructions
Tap the following buttons:
1. Call up the home screen.
2.
3. for "Settings"
4. OK to confirm
5. for "Service"
6. OK to confirm
7. for "Yes"
8. OK to confirm
9. for "Test high limit safety cutout"
10. OK to confirm
11. for "Yes"
12. OK to confirm
Emissions Test Mode
27