Emissions Test Mode - Viessmann VITOPEND Operating Instructions Manual

Emissions test mode

Emissions test mode should only be acti-
vated by your flue gas inspector during
the annual inspection.
Press the following keys:
1. for settings; "
Stopping emissions test mode
Press the following keys:
1. for settings; "
2.
for " ".
3. OK to confirm; "OFF" flashes.
4. OK to confirm.
Note
Emissions test mode also ends automat-
ically after 30 min.
2.
3. OK to confirm; "ON" flashes.
4. OK to confirm; "ON" is shown con-
" flashes.
" flashes.
Emissions test mode
for " ".
stantly.
23