Starting Emissions Test Mode; Switching On Emissions Test Mode; Stopping Emissions Test Mode - Viessmann Vitocrossal 100 Operating Instructions Manual

Starting emissions test mode

Switching on emissions test mode

Emissions test mode should only be activated by your
flue gas inspector during the annual inspection.
Press the following keys:
1. for settings; "
2.
for " ".

Stopping emissions test mode

Press the following keys:
1. for settings; "
2.
for " ".
3. OK to confirm; "OFF" flashes.
4. OK to confirm.
Note
Emissions test mode ends automatically after
30 minutes.
" flashes.
" flashes.
3. OK to confirm; "ON" flashes.
4. OK to start the burner for checking; "ON" will be
displayed constantly.
5. OK to start the burner for the test.
"ON" is constantly displayed.
The standard display appears after 4 seconds.
Emissions test mode
19