Setting The Primary Heating Circuit For The Standard Menu; Setting The Time And Date; Language Selection - Viessmann VITOCROSSAL 300 CU3A 35 Operating Instructions Manual
Floor mounted, gas-fired condensing boiler with matrix gas burner and lambda pro control, for operation with natural gas and liquid propane gas, heating input 19 to 199 mbh, 5.6 to 58 kw, with vitotronic 200 kw6b controls
Hide thumbs
Also See for VITOCROSSAL 300 CU3A 35:
- Technical data manual (33 pages) ,
- Service instructions manual (116 pages) ,
- Installation instructions manual (60 pages)
Table of Contents
Advertisement
Additional Adjustments
Setting the Primary Heating Circuit for the Standard Menu
Setting the Time and Date
Language Selection
30
Vitocrossal 300 CU3A 26 to 199 Operating
If your heating system has several heating circuits,
you can select the heating circuit to be displayed in
the standard menu.
Extended menu
1.
2. "Settings"
3. "Standard menu"
4. Select the heating circuit:
- "Heating circuit 1" (for heating circuit 1)
"HC1" is displayed
- "Heating circuit 2" (for heating circuit 2)
"HC2" is displayed
- "Heating circuit 3" (for heating circuit 3)
"HC3" is displayed
The time and date are factory-set. If your heating system
has been without power for a long time, it may be
necessary to set the time and date.
Extended menu:
1.
2. "Settings"
3. "Time/Date"
4. Set the time and date.
Extended menu:
1.
2. "Settings"
3. "Language"
4. Select the required language with
5. Accept by pressing OK.
Advertisement
Table of Contents
