Checking Message Lists; Emissions Test Mode - Viessmann VITODENS 200-W B2HE 85 Operating Instructions Manual
Wall mounted gas-fired condensing boiler with 7 inch color touchscreen display
Hide thumbs
Also See for VITODENS 200-W B2HE 85:
- Installation instructions manual (56 pages) ,
- Quick start up manual (8 pages)
Table of Contents
Advertisement
Vitodens 200-W B2HE Operating
Checking Message Lists
Emissions Test Mode
Calling Up Information/Emissions Test Mode
Tap the following buttons:
1.
2.
"Message lists"
3. If there are any corresponding messages:
"Status"
"Warnings"
"Information"
"Faults"
"Service messages"
Note: You can only activate emissions test mode in the
service menu.
Emissions test mode for testing flue gas must only
be activated by your certified contractor. If possible,
have the emissions test carried out during the
heating season.
Note: The certified contractor can activate emissions test
mode even if the control panel is locked.
35
Advertisement
Table of Contents
