Viessmann VITOCROSSAL 300 CU3A 35 Operating Instructions Manual page 28
Floor mounted, gas-fired condensing boiler with matrix gas burner and lambda pro control, for operation with natural gas and liquid propane gas, heating input 19 to 199 mbh, 5.6 to 58 kw, with vitotronic 200 kw6b controls
Hide thumbs
Also See for VITOCROSSAL 300 CU3A 35:
- Technical data manual (33 pages) ,
- Service instructions manual (116 pages) ,
- Installation instructions manual (60 pages)
Table of Contents
Advertisement
DHW Heating
Switching Off DHW Heating
You do not want to heat DHW or provide central
heating
For the primary heating circuit (refer to page 30)
Standard menu
1.
for the operating program "Standby mode"
(frost protection is active).
2. OK to confirm.
For all heating circuits
Extended menu
1.
2. "Heating"
3. Poss.
for the required heating circuit.
4. "Heating program"
5. "Standby mode" (frost protection active)
28
Vitocrossal 300 CU3A 26 to 199 Operating
You do not want to heat DHW, but do want to provide
central heating
Extended menu
1.
2. "Heating"
3. Poss.
for the required heating circuit.
4. "Heating program"
5. "Heating and DHW"
6.
until the menu is displayed.
7. "DHW"
8. "Set DHW temperature"
9. Set 50°F (10°C).
--
Advertisement
Table of Contents
