Daikin ERGA06EAV3H Installer's Reference Manual page 235

ERGA04~08EAV3+V3A+V37 + EHSH/X(B)04+08P30+50EF
Daikin Altherma 3 R ECH₂O
4P678716-1 – 2022.01
c Smartphone + app
Configuration
To configure the Daikin Residential Controller app, follow the in-app instructions.
While doing this, the following actions and information are needed on the user
interface:
Mode: Turn AP mode ON (= WLAN cartridge/module active as access point) or OFF.
# Code
[D.1] N/A
Reboot: Reboot the WLAN cartridge/module.
# Code
[D.2] N/A
WPS: Connect the WLAN cartridge/module to the router.
# Code
[D.3] N/A
INFORMATION
You can only use this function if it is supported by the software version of the WLAN,
and the software version of the Daikin Residential Controller app.
Remove from cloud: Remove the WLAN cartridge/module from the cloud.
# Code
[D.4] N/A
Home network connection: Read out the status of the connection to the home
network.
# Code
[D.5] N/A
Cloud connection: Read out the status of the connection to the cloud.
The Daikin Residential Controller app needs to be
installed on the user's smartphone. See:
http://www.onlinecontroller.daikineurope.com/
Description
Enable AP mode:
▪ No
▪ Yes
Description
Reboot the gateway:
▪ Back
▪ OK
Description
WPS:
▪ No
▪ Yes
Description
Remove from cloud:
▪ No
▪ Yes
Description
Home network connection:
▪ Disconnected from [WLAN_SSID]
▪ Connected to [WLAN_SSID]
11 Configuration
|
Installer reference guide
235