Installation And Aeration - Alfa Network QUICK User Manual

- The oven can be installed behind a fireproof wall leaving the non visible sides of the
oven free and accessible (see img 3)
- The burner can be removed from the front or rear, so you must leave adequate
space for removal. See minimum distances on the specification sheets of your alfa-
oven. (see img 2)
- Do not cover the oven with materials which would cause excessive overheating of
the outside of the oven with possible paint deterioration
- Provide at least 2cm of air around the oven at the front (see img 1) to ensure easy
removal in case of need.
- The premises must be well ventilated by providing suitable air vents.
- See ventilation section on page 13. Lack of air recirculation especially in gas ovens
causes malfunctions
- Use fireproof materials for wall construction. (see img 1)
- For the fume outlet refer to the venting section on page 15. Consider fitting a
butterfly valve with the possibility of opening and closing at the front.
- The flue pipe must protrude at least 150cm from the highest part of the roof to
prevent fumes from invading the upper floors
- Install the oven on the base. When installing on a surface, make sure to screw the
feet on.
10
INSTALLATION
BEHIND A WALL
BUILT-IN INSTALLATION IS TO BE UNDERSTOOD
INSTALLATION BEHIND A WALL
AS
WARNING: