Daikin Vision Installation And Maintenance Manual page 15

Figure 28: Tighten Cap Screw to 1/4" of the Coupling
Figure 29: Tighten until Latch and Coupling Meet
Once all four corners have been tightened the HEPA filter
should now be properly seated and sealed.
Repeat the process with all remaining filters working from the
bottom to the top.
Figure 30: Properly Installed HEPA Filter
www.DaikinApplied.com
STEP 8: To complete the installation, add the appropriate
prefilter latches to the prefilter holding frame. Once latches
are installed, place the prefilter in the frame, secure with the
latches and the installation is complete.
Repeat with all remaining prefilters and frames.
Figure 31: Installation of Prefilter into Frame
Figure 32: Completed Assembly
15
Installation Guidelines
IM 915-13 • VISION - EXTENDED SIZES