Edirol UA-20 Owner's Manual page 69

Volume Control setting
If you installed the standard Windows driver, set the Windows volume control.
If the Volume Control is not installed on your computer, use the Control Panel icon
Add or Remove Programs to install it. For details on installation, refer to the
Windows manual or Help.
If Mute is checked or if the slider is lowered all the way, no sound will be output from
the UA-20.
1.
Open the Volume Control.
Click the Windows Start menu, and select Programs | Accessories | Entertainment |
Volume Control.
2.
Raise or lower the slider to adjust the volume of the UA-20.
If you have installed the Standard driver, the UA-20 can use the Windows volume
control to adjust the output volume.
You will be able to use the UA-20 at the best audio quality if you set the Volume
Control volume to the maximum setting.
Items that can be set
CD Player
WAVE
SW Synth
*1
If the CD playback volume does not change when you adjust this control, then change
the WAVE volume.
Controls the volume of "audio CDs" on the internal CD-ROM drive
of the computer. (*1)
Controls the volume of sound output from the "EDIROL UA-20" au-
dio output device. Digital output and analog output will change.
Controls the volume of the software synthesizer built into Windows.
Appendices
69